Goot CP-1515 - Conventional Desoldering Wicks - 1,5mm

Cable for suction of molten solder - 1.5 mm

• High-quality cable with braided copper wire.
• The cable is saturated with special chlorine and quickly removes unwanted solder when using a soldering iron.
• When suctioning, only touch the soldering iron and packaging.
• Otherwise there is a risk of burns.

Application:

• Place the cable on the solder you want to remove and then push the heated tip of the soldering iron on the cable
• After absorbing the solder Remove the cable
• Cut the used part of the cable with pliers
• Thin and soft wire has efficient heat transfer
• Removes solder quickly and with good thermal response.
• Brand: Goot

  The pictures of products are only demonstrative and may be different than the real look of products. However, this does not change their basic characteristics